Water filters to remove dirt and rust, or taste and odor, from water.

Standard single cartridge water silters have a clear transparent sump, a black head with 3/4" female pipe threads for both inlet and discharge, and measure 5-1/8" wide x 12-1/2" high. These are adequate for a maximum of 10 gallons per minute service flow rate, and are rated for 125 psi pressure.
Dirt and Rust Sediment Filters
$ 41.80	PSCLP5	Single filter Dirt and Rust sediment filters. This complete water filter comes with one WP5 replacement cartridge that will trap sediment down to 5 microns in size.
$ 7.95	PFMC1	Mounting Bracket for Standard 3/4" Filter Housing Caps w/ bosses.
$ 5.35	PFSW2	Spanner Wrench for 3/4" Standard Filter Housings
$ 3.15	WP5	The WP5 dirt and rust sediment filter element is wound polypropylene. These are the proper elements for use when replacing the old element of the filter above. Superior to the common pleated paper, these filter elements remove smaller particles. The polypropylene cord is wound around the core in a precise pattern that ensures a high efficiency rate, and a high dirt loading capacity. WP5 elements are 9-7/8" long, and will fit most single cartridge standard water filter housings.
$ 2.95	WP5 Case	Case of 24 WP5 sediment dirt and rust filter elements.
Taste and Odor Charcoal Filters
$ 51.75	PSCLGAC	Complete Taste and Odor removal filter comes with one GAC10 replaceable cartridge designed to reduce or eliminate most unwanted taste and odors such as chlorine.
$ 13.10	GAC10	The GAC10 canister style cartridge is 9-7/8" high, and filled with lignite based granular carbon. The water enters the cartridge from the base of the canister and must travel through the entire charcoal bed before exiting at the top. This filtration technique maximizes contact time with the carbon to insure optimal contaminant absorption.

DOUBLE CARTRIDGE WATER FILTERS These double cartridge length filters have an opaque blue sump with a black head. The head of the filter housing has 3/4" female iron pipe threaded inlet and discharge. Unit measures about 5-1/8" wide x 22-3/8" long. These are adequate for a maximum 20 gallons per minute service flow rate. Housing has a 125 psi pressure rating.
$ 59.70	PS20S1	Double Dirt and Rust Filter comes with two WP5 replaceable cartridges that are connected together by a plastic splice. The splice can be reused many times. Buy replacement WP5 cartridges above.
$ 79.40	PS20GAC	Double Taste and Odor Filter comes with a single 20" GAC20 cartridge.
$ 28.90	GAC20	20" long canister style cartridge is filled with granular carbon, just like the GAC10 above.

HIGH CAPACITY WATER FILTERS These large diameter cartridge filters have an opaque blue sump with a black top. The inlet and outlet are 1-1/2" female pipe thread. Housing measures 7-1/4" x 13-5/8" long. The high capacity water filters are adequate for 40 gallons per minute maximum flow at pressure of up to 100 psi.

$ 83.50	HD15R50	High Capacity Sediment Filter comes complete with a single R50BBS replaceable cartridge that will trap sediment down to 50 microns. Comes with a spanner wrench
$ 17.80	R50BBS	High Capacity Jumbo Sediment Filter Elements are pleated polyester fabric. The R50BBS filter element is 4-1/2" diameter x 10" long.
$ 8.05	PFSW3	Spanner Wrench for Large Diameter Filter Housings.