| INDUSTRIAL GRADE CLT-JT JACKETED HEATER CABLE |
DEAN BENNETT SUPPLY |
|
|
| CLT-JT type self regulating heat cable is a parallel circuit electric heater strip. The heat cable has an irradiation cross-linked conductive core of polymer material, extruded over the multi-stranded, tin plated, 18 gauge copper bus wires. The core material is conductive and increases or decreases its heat output in response to changes in temperature. The inner jacket is thermoplastic and is extruded over and bonded to the core material. Over the inner jacket, is a thermoplastic elastomer outer jacket. A tinned copper braid is installed over the second jacket to provide a continuous ground path. The final protective polyolefin outer jacket is added to make the heating cable suitable for wet applications, and protects the cable in installations where abuse is present. |
The parallel bus wires apply voltage over the entire length of the heat cable, and the conductive core provides an infinite number of parallel conductive paths, permitting the installer the ability to cut the heat cable to any length needed, in the field. Because of the heating cable structural design, cutting will not create any dead spots or cold zones in the heat cable run. The heat cable can be overlapped without creating any hot spots or burnout, due to its self regulating characteristics. CLT-JT self regulating heat cable is ideal for use in fluid flow under low temperature conditions. Typical applications of the CLT-JT heat cable are freeze protection and low watt density process temperature systems such as product pipelines, fire protection, process water, dust suppression systems, hot water and structural deicing applications. |
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
No Return of Merchandise