Wintergard heat tracing water line heat cables for freeze protection from inside the water pipe.

WINTERGARD HEAT TAPE for INSIDE YOUR WATER PIPE
DEAN BENNETT SUPPLY 800-621-4291

DOES YOUR WATER LINE FREEZE DURING THE WINTER MONTHS?

Cold weather creates problems with freezing when water pipes are not buried deep enough to keep them protected. Our heat tape installs inside the water pipe to keep the inside warmer than freezing. These heat tape units are ideal for long lines going from a well to a house where the cold causes problems.

Thermostatically controlled, these heat tape units only heat when temperatures approach freezing. Because they turn off when not needed, they consume less energy than units that are on all the time.

WinterGard inside the pipe heat tapes can be installed in PVC or poly water lines without a problem.

NEED TO PROTECT A LINE THAT IS ALREADY INSTALLED?

The Retro-fit Inside the Pipe Heat Tape system allows you to install a heat tape inside the existing water line where the ability to insulate the outside of the pipe is not possible. The Retro-fit units provide higher heat to compensate for the lack of insulation. The Retro-fit heat tapes are available in 120V power for up to 70' lengths, and in 240V power for units over 70' long, up to 250'.

RETRO40 through RETRO250 models should be bought up to 1 foot shorter than the line they will protect. Retro-fit heat tapes are designed for 1" and 1 1/4" Polyethylene pipe. 240V units come with a thermostat and must be connected to a GFI breaker.

Model	Description	Voltage	Price
RETRO40	40' Retro-fit In-Pipe Heat Tape	120V	$ 675.00
RETRO50	50' Retro-fit In-Pipe Heat Tape	120V	$ 710.00
RETRO60	60' Retro-fit In-Pipe Heat Tape	120V	$ 732.00
RETRO70	70' Retro-fit In-Pipe Heat Tape	120V	$ 774.00
BELOW MODELS ARE 240V UNITS
RETRO80	80' Retro-fit In-Pipe Heat Tape	240V	$ 705.00
RETRO90	90' Retro-fit In-Pipe Heat Tape	240V	$ 710.00
RETRO100	100' Retro-fir In-Pipe Heat Tape	240V	$ 752.00
RETRO110	110' Retro-fit In-Pipe Heat Tape	240V	$ 800.00
RETRO120	120' Retro-fit In-Pipe Heat Tape	240V	$ 851.00
RETRO130	130' Retro-fit In-Pipe Heat Tape	240V	$ 907.00
RETRO140	140' Retro-fit In-Pipe Heat Tape	240V	$ 955.00
RETRO150	150' Retro-fit In-Pipe Heat Tape	240V	$ 1014.00
RETRO160	160' Retro-fit In-Pipe Heat Tape	240V	$ 1047.00
RETRO170	170' Retro-fit In-Pipe Heat Tape	240V	$ 1084.00
RETRO180	180' Retro-fit In-Pipe Heat Tape	240V	$ 1116.00
RETRO190	190' Retro-fit In-Pipe Heat Tape	240V	$ 1225.00
RETRO200	200' Retro-fit In-Pipe Heat Tape	240V	$ 1256.00
RETRO210	210' Retro-fit In-Pipe Heat Tape	240V	$ 1296.00
RETRO220	220' Retro-fit In-Pipe Heat Tape	240V	$ 1356.00
RETRO230	230' Retro-fit In-Pipe Heat Tape	240V	$ 1376.00
RETRO240	240' Retro-fit In-Pipe Heat Tape	240V	$ 1408.00
RETRO250	250' Retro-fit In-Pipe Heat Tape	240V	$ 1340.00

NEW WATER LINE INSTALLATION WHERE INSULATING IS POSSIBLE

Installed inside the water line, the unit is protected against damage from outside sources. This makes the unit last longer than heat tapes that wrap around the pipe and are exposed to abuse. The temperature sensor is attached to the outside of the pipe to thermostatically control when to turn on the heat tape.

This heat tracing internal pipe heat cable kit will protect your water pipes from the inside out, keeping them from freezing.
"MISER" Model

Formerly marketed
as SureFlow

Model #	Description	Price
MINI14	14' Inside the Pipe Heat Tape	$ 368.00
MINI18	18' Inside the Pipe Heat Tape	$ 382.00
MINI22	22' Inside the Pipe Heat Tape	$ 396.00
MINI26	26' Inside the Pipe Heat Tape	$ 410.00
MINI30	30' Inside the Pipe Heat Tape	$ 424.00
MINI34	34' Inside the Pipe Heat Tape	$ 438.00
	Miser Units
MISER40	40' Inside the Pipe Heat Tape	$ 769.00
MISER50	50' Inside the Pipe Heat Tape	$ 795.00
MISER60	60' Inside the Pipe Heat Tape	$ 864.00
MISER70	70' Inside the Pipe Heat Tape	$ 839.00
MISER80	80' Inside the Pipe Heat Tape	$ 849.00
MISER90	90' Inside the Pipe Heat Tape	$ 850.00
MISER100	100' Inside the Pipe Heat Tape	$ 859.00
MISER110	110' Inside the Pipe Heat Tape	$ 865.00
MISER120	120' Inside the Pipe Heat Tape	$ 870.00
MISER130	130' Inside the Pipe Heat Tape	$ 879.00
MISER140	140' Inside the Pipe Heat Tape	$ 904.00
MISER150	150' Inside the Pipe Heat Tape	$ 957.00
MISER160	160' Inside the Pipe Heat Tape	$ 974.00
MISER170	170' Inside the Pipe Heat Tape	$ 1008.00
MISER180	180' Inside the Pipe Heat Tape	$ 1063.00
MISER190	190' Inside the Pipe Heat Tape	$ 1093.00
MISER200	200' Inside the Pipe Heat Tape	$ 1155.00
MISER210	210' Inside the Pipe Heat Tape	$ 1189.00
MISER220	220' Inside the Pipe Heat Tape	$ 1271.00
MISER230	230' Inside the Pipe Heat Tape	$ 1281.00
MISER240	240' Inside the Pipe Heat Tape	$ 1292.00

The pipe should be protected with closed cell insulation to insure proper temperature sensing operation. Available in lengths from 18' up through 240', there is a in-pipe heat tape for every application, and they run on standard 120V power.

MINI18 through MINI34 models are selected to be up to 6 inches shorter than the pipe line they will protect. If your heat cable is longer than the pipe, you can add additional pipe length to accommodate the extra length of the cable. These MINI models have a fitting with a 1/2" male pipe thread on the end that will connect to your threaded tee. Use a tee that matches your pipe size, and then use a reducing bushing in it to have a female 1/2" pipe thread to screw the heat tape fitting into. Also be aware that the MINI does not come with a GFI circuit. You will need to install a 5 mA ground-fault interrupter for the plug receptacle.

MISER40 through MISER250 models should be ordered up to 1 foot shorter than the water line they protect, since they are more rigid, and unable to flex inside the pipe to take up length.

These heat tapes for inside your water pipe are a special order item. Be sure to pick the size that is closest to the length of your water line.